Chlorine is a poisonous gas, even while it does kill the bacteria
in our tap water...
your lungs as the hot shower
action vaporizes the chlorine in the water...
your skin and hair as the hot water opens your pores to the
chlorine, leaving your hair brittle and your skin itchy and flaky.
Chlorine gets absorbed into your body and acts as a pollutant.
line is, research shows we should filter out
our drinking water before drinking it!
make sense to do the same
for the shower and bath?
Remember, your skin is your largest organ!
Click here to learn more about the hazards of Chlorine!
Stop Bathing in Chlorine!
The Rainshow'r CQ-1000 is the
only Shower Filter to Include
Technology for an Energized Shower Experience!
"A long, hot shower can be
dangerous. The toxic chemicals are inhaled in high
John Andelman, PhD., Bottom Line , 8/87
- Removes 90
- 95% of free chlorine
Chlorine into a harmless soluble chloride
younger looking skin
more manageable hair
from dry skin and scalp
lathering and sudsing
fading of color treated-hair
- Great for
those with Chlorine sensitivity
Crystalline quartz for energy enhanced shower
- No back
in minutes (even on hand-held shower heads)
special tools or professional help required.
Replaceable cartridges lasts 6-9 months for a family of 4
or an estimated 15,000 - 20,000 gallons of usage.
The Rainshower CQ-1000 uses 14.5
ounces of "Enhanced" KDF 55, crystalline quartz, and special
polyester sediment trapping material (Poly-flow) to remove between
90-95% of Chlorine. Rainshower's unique "Enhanced" KDF removes
more Chlorine than other brands of shower filters. The sun dried
quartz crystals help to "energize" the water by reducing the
water's surface tension. This allows for an increase in the
sudsing and lathering of soaps and shampoos. The water has a
"lighter" feel, similar to the that of softened water.
Click here to see the Shower Filter installed on a variety of
shower heads both regular and hand-held.
Click for Frequently Asked Questions about the CQ-1000 Shower
CQ1000 Shower Filter has been designed and engineered to work most
effectively with high quality, low-flow shower heads that conform
to the required 2.5 gallons per minute flow rate specified by the
U.S. Energy Policy Act of 1992. If flow rates exceed 2.5 gpm
the contact time required for maximum chlorine conversion will be
reduced. For this reason we recommend only high quality, low
flow shower heads purchased after 1995 for any shower filter
application. Brass threads are evidence of quality construction.
The Shower Filter is very
easy to install. Simply screw the filter inlet onto your
existing shower arm. It does not require the use of plumbers'
tape for leak sealing. Be careful not to over tighten, as this
may cause the housing to crack.
Changing the filter is just
as easy. Simply unscrew the body cap, pull out the
existing filter cartridge, check for proper seating of the "O"
rings, and pop in the replacement cartridge.